At a glance: Angi’s Phoenix-area data puts the average paver patio at about $3,925, with typical projects from $2,479 to $7,231. HomeGuide prices installed concrete pavers at $10 – $17 per square foot. Run your own numbers below.
Paver cost calculator
Enter the area and the paver you're considering. The range uses published installed prices per square foot; a contractor confirms the real number on site.
Estimated cost
–
- Area
- –
- Pavers, installed
- –
- Sealing
- –
Not included: removing an existing slab, grading or drainage work, steps, walls, curbing and permits. Curved layouts and intricate patterns run toward the high end.
Get an exact quotePool decks: the most common upgrade
Travertine is the go-to pool deck material, at about $15 – $27 per square foot installed (HomeAdvisor). It costs more than concrete pavers, but HomeGuide reports it stays 20% – 30% cooler than concrete in direct sun. A 400 sq ft deck in travertine would run roughly $6,000 – $10,800 at those rates.
Patio cost by size
| Size | Area | Installed, concrete pavers |
|---|---|---|
| 6 × 9 ft | 54 sq ft | $500 – $950 |
| 10 × 10 ft | 100 sq ft | $950 – $1,700 |
| 12 × 12 ft | 144 sq ft | $1,400 – $2,500 |
| 20 × 20 ft | 400 sq ft | $3,800 – $6,800 |
Size ranges from HomeGuide.
Material comparison
| Material | Installed / sq ft | Notes |
|---|---|---|
| Concrete pavers | $10 – $17 | Widest selection; driveway-rated |
| Brick | $8 – $19 | Classic look, good for borders |
| Travertine | $15 – $27 | Cooler underfoot, popular by pools |
| Natural stone | $16 – $35 | Premium flagstone and cut stone |
Driveways and RV pads
Anything that carries a vehicle needs a deeper compacted base. HomeAdvisor puts paver driveways at about $10 – $30 per square foot; a 600 sq ft driveway would be around $6,000 – $18,000. Ask for base depth in writing on any driveway or RV pad quote.
Building in phases
Lots of homeowners start with a patio and add a pool deck, paths or a fire-pit area later. If you plan to phase the work, pick a paver line likely to stay in production and ask the contractor to note the product and color on your invoice so later sections match.
Other costs to budget for
- Labor: about $6 – $11 per square foot (HomeGuide); Angi lists Phoenix-area patio pros at $50 – $80 per hour.
- Base materials: gravel and sand run about $1 per square foot (HomeAdvisor).
- Site prep: removing rock, turf or an old slab is extra.
- Sealing: optional, roughly $1.50 – $3 per square foot (HomeAdvisor).
- Permits: where needed, Angi puts them at $100 – $300. Confirm with your contractor or the Town of Queen Creek.
Pavers vs. poured and stamped concrete
| Surface | Installed / sq ft | Notes |
|---|---|---|
| Poured concrete | $5 – $15 | Lowest cost; cracks are patched |
| Stamped concrete | $8 – $19 | Decorative finish on one slab |
| Concrete pavers | $10 – $17 | Replace individual units if damaged |
Concrete pricing from HomeGuide. The Town of Queen Creek reports water hardness of 6 – 17 grains per gallon, so point sprinklers away from new pavers to limit mineral spotting.
FAQ
Why is my quote higher than the calculator?
The calculator covers installed pavers and optional sealing only. Demolition, grading, steps, walls, curves and permits are added after a site visit.
Is travertine worth it for a pool deck?
If comfort underfoot matters, many homeowners think so. It costs more than concrete pavers but stays cooler in direct sun.
How do I compare two quotes?
Line them up by base depth, paver product, square footage and what prep is included, not just the total price.
Sources
- Angi, How much does a paver patio cost in Phoenix, AZ? Average, range, hourly rate and permit cost. Checked November 2026.
- HomeGuide, How much does a paver patio cost? Per-square-foot cost, labor and costs by size.
- HomeGuide, How much does a patio cost? Natural stone, poured and stamped concrete.
- HomeGuide, How much do travertine pavers cost? Surface temperature compared with concrete.
- HomeAdvisor, patio, travertine, driveway pavers and paver patio cost guides.
- Town of Queen Creek, Water FAQ. Water hardness.