Patio off a new build
Replace bare dirt or a small builder slab with a usable, level patio.
Queen Creek, Arizona
From a first patio on a new build to a full pool deck and fire-pit area, get a licensed Queen Creek hardscape contractor to measure your yard and quote it in writing.
Queen Creek Pavers is a free referral service. One licensed local contractor receives your request; we don't install pavers.
Tell us about the project. A licensed hardscape contractor serving Queen Creek will contact you to measure and quote it.
A licensed paver contractor will reach out to schedule a time to measure. Have any HOA requirements handy if you have them.
What people build
Replace bare dirt or a small builder slab with a usable, level patio.
Travertine or light pavers around a new or existing pool, easier on bare feet.
A heavier compacted base and interlocking pattern built to carry vehicle weight.
Connect the patio, side yard and gathering spots with matching pavers.
Range published by the Town of Queen Creek water utility. Homes on a different water provider may differ. Town water FAQ
Local conditions
Materials
Per square foot, installed. Pattern complexity and site prep can move a project up or down the range.
Most popular all-rounder, available in many colors and sizes, and driveway-rated.
Timeless clay or concrete brick for borders and classic patios.
Natural stone favored for pool decks for its look and cooler feel.
Flagstone and cut stone for a premium, organic finish.
Installed ranges from HomeGuide (concrete pavers, natural stone) and HomeAdvisor (brick, travertine), checked November 2026.
The build
A good-looking surface depends on what's underneath. Ask your contractor about each step.
Soil is removed to the right depth and graded to drain away from the home.
Crushed aggregate compacted in layers; thicker for driveways and RV pads.
A screeded sand layer, then pavers set in your chosen pattern.
Edge restraints, joint sand, final compaction and optional sealer.
Pricing
Angi's Phoenix-area figures put the average paver patio near $3,925, with most falling between $2,479 and $7,231.
Sources: Angi, Phoenix paver patio costs; HomeAdvisor, travertine; HomeGuide, patio sizes.
Coverage
We accept requests throughout Queen Creek and from nearby Gilbert, San Tan Valley and east Mesa when a contractor is available.
Verify the license with the Arizona Registrar of Contractors, get base depth and paver product written into the contract, and confirm HOA rules if your community has them.
FAQ
Yes. Many homeowners start with the patio and add paths or a pool deck later. Choose a paver line that's likely to stay available so later sections match.
Concrete is usually cheaper up front. Pavers cost more but give you more design options, and individual pavers can be replaced if one cracks or stains.
Travertine and lighter-colored concrete pavers are common choices because they stay cooler in direct sun than dark surfaces.
No, it's optional. A sealer helps resist stains and hard-water spots. HomeAdvisor puts resealing around $1.50–3 per square foot.
Nothing. The request and on-site measurement are free, with no obligation.
Free measurement and a written quote from a licensed Queen Creek contractor.